Assessment Validation Overview: Steps to Validate Assessments
Assessment Validation Overview: Steps to Validate Assessments
Blog Article
Among the numerous obligations RTOs face post-registration—annual declarations, AVETMISS reporting, marketing compliance—validation is often the most dreaded.
Although our articles cover validation extensively, let’s redefine it. According to ASQA, validation is a quality review of the assessment process.
To put it differently, validation is the process of confirming the accurate parts of an RTO's assessment process and identifying what can be enhanced. A correct understanding of its components makes it less intimidating.
As stated in Clause 1.8 of the SRTOs 2015, RTOs must ensure their assessment systems, including RPL, comply with the training package requirements and adhere to the Principles of Assessment and Rules of Evidence.
The standards specify that two types of validation need to be performed.
The first assessment validation type verifies that your RTO's assessments adhere to the training package requirements within your scope.
The next type of validation confirms assessments are carried out following the principles of assessment and rules of evidence.
It suggests that validation takes place before and after the assessment. This article focuses on the first type—assessment tool validation.
An Overview of the Two Types of Assessment Validation
Assessment Validation Unpacked
As noted earlier and in our earlier blog entries, validation is split into two stages: (1) assessment tool validation and (2) post-assessment validation.
Pre-assessment validation, also referred to as assessment tool validation, is related to the first part of the clause, ensuring all unit requirements are addressed and workbooks are entirely compliant.
On the implementation side, post-assessment validation ensures Registered Training Organisations conduct assessments according to the Principles of Assessment and Rules of Evidence.
We will dedicate this article to assessment tool validation.
The Process of Assessment Tool Validation
Now that we’ve differentiated the two types of validation, let’s examine assessment tool validation in detail.
Appropriate Times for Assessment Tool Validation
Assessment tool validation is intended to confirm that all elements, performance criteria, and performance and knowledge evidence are met by your assessment tools.
Thus, whenever new learning resources are purchased, assessment tool validation should be conducted before students use them.
There's no requirement to wait for the next validation schedule in your 5-year cycle. Validate new resources promptly to ensure they’re appropriate for students.
Still, this isn't the only reason to perform this type of validation. Conduct assessment tool validation also when you:
- resources are updated by you
- new training products are added to your scope
- course is reviewed by you against training product updates
- identifying your learning resources as a risk during your risk assessment
The risk-based regulatory approach of ASQA requires RTOs to perform regular risk assessments. Student complaints about learning resources indicate it's time for assessment tool validation.
Which Training Products to Validate?
Bear in mind, this validation aims to ensure compliance of all learning resources before use. All RTOs are required to validate all unit resources.
What Do You Need for Assessment Tool Validation?
Learning Resources
Given that you are conducting assessment tool validation, you will need the full array of your learning resources:
Mapping tool – the primary document to check. It reveals which assessment items align with unit requirements, expediting validation.
Learner/student workbook – assess its appropriateness for use as an assessment tool. Verify clear instructions and adequate answer fields. This is often a gap.
Assessor guide/marking guide – verify that instructions for assessors are comprehensive and clear benchmarks for each assessment item are present. Clear benchmarks are key to reliable assessment outcomes.
Other related resources – may consist of checklists, registers, and templates created separately from the workbook and marking guide. Validate them to ensure they are appropriate for the assessment task and address unit requirements.
Validation Board
Clause 1.11 defines the requirements for validation panel members, stating validation can involve one or more individuals. RTOs usually require all trainers and assessors to be present, sometimes including industry experts.
Collectively, your validation panel should have:
Vocational competencies and industry skills pertinent to the unit being validated
Recent knowledge and skills in vocational teaching and learning
One of the following training and assessment qualifications:
TAE40116 Certificate IV in Training and Assessment or its equivalent
Validation form/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
A validation tool is beneficial for both the validation process and documentation. It makes it easier to understand how each assessment item aligns with each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the get more info students use them.
At the same time, it acts as documentation that you have validated your resources before allowing student use.
Although ASQA does not recommend or require a specific template for assessment tool validation, numerous templates can be found online. These tools typically have validators examine the tools holistically to determine if they meet the principles of assessment.
Assessment Principles Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable
Although such templates ease validation, they can cause judgment errors since there’s minimal space for comments on each assessment item.
A more detailed template is recommended to thoroughly inspect each unit requirement and the assessment items that align with them. Below is an example:
Element Performance Criteria Instructions for Assessment Benchmarks Assessment Tools Rectification Recommendations
What do you Need to Check?
What Needs Checking?
As mentioned in our blog post Common Problems In Assessment Tools, you need to ensure that your assessment tools allow trainers to follow assessment principles and evidence rules.
Principles of Assessment
Fairness – Are equal opportunities and access offered to everyone in the assessment process?
Flexibility – Does the assessment accommodate different options to demonstrate competence according to various needs and preferences?
Validity – Does the assessment assess what it is intended to assess? Is it a valid tool for measuring the required skill or knowledge?
Reliability – Will the assessment yield consistent results each time, regardless of the trainer? Will different assessors make the same decision on skill competence?
Fundamental Rules of Evidence
Validity – Does the evidence prove that the candidate possesses the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is the evidence adequate to ensure the learner has the required skills and knowledge?
Authenticity – Does the assessment tool prove that the work is the candidate’s own?
Currency – Do the assessment tools align with current units of competency and up-to-date industry practices?
Despite being frequently covered in VET professional development and nationally recognised training, many tools still have issues with these requirements.
To prevent using learning resources that do not meet some unit requirements, make sure to follow these guidelines:
Act on Your Words
Focus on the verbs used in the unit requirements and make sure they are addressed by the assessment item. For instance, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement asks students to:
Carry out each of the following activities at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication in accordance with service and regulatory requirements:
diaper change
bottle preparation, feeding babies from bottles, and cleaning equipment
prepare solid food and feed babies
respond to infant signs and cues appropriately
prepare and settle babies for sleep
monitor and support physical exploration and gross motor skills appropriate for the age
Having students describe changing nappies for babies under 12 months doesn’t directly address the unit requirement. Unless it’s meant to assess underpinning knowledge (i.e., knowledge evidence), students should be performing the tasks.
Plurals Matter!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Mind the numbers. In our CHCECE032 example, one unit requirement asks students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby won’t suffice.
All or No Competence
Mind the lists. In the previous example, if students perform only half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Clarify Further
Every assessment item must include clear and specific benchmark answers to guide the assessor’s judgment on student competence. Consequently, ensure your instructions are clear and not confusing for students or assessors. For example:
What kind of information can be included in a work package?
What kinds of information can be included in a work package?
The answer could include:
Needed materials
Appropriate costs
Activity timeframe
Assigned functions and responsibilities
If an assessment item requires multiple answers, specify how many answers are needed from a student. This ensures your assessment is reliable, and the evidence obtained is valid.
The same applies to assessment items with double-barrelled questions or questions that ask for more than one answer simultaneously. These can confuse both students and assessors, as illustrated in the example below:
Name a hazard and/or environmental concern in the workplace and choose the most effective hazard control hierarchy.
Answers might include, but are not limited to:
Weather conditions – isolating the work area, engineering, personal protective equipment
Work area and ground conditions – elimination, isolating, engineering controls
People – isolation, use of engineering controls, administrative controls
Structural hazards – substitution, isolation, engineering
Chemical hazards – isolation, engineering controls, administration
Equipment or machinery – isolating, engineering controls, administration
Avoiding double-barrelled questions makes it easier for students to answer and for assessors to judge competence accurately.
Seeing these requirements, you might wonder, “Don’t learning resource developers provide audit guarantees?” However, these guarantees mean you must wait for an audit to rectify noncompliance. This affects your compliance history, so it’s wiser to take a safe and compliant approach.